瑞士TESA測高儀00730035_二維手動MICRO-HITE900測高儀蘇州特約店

產品簡介
瑞士TESA測高儀00730035_二維手動MICRO-HITE900測高儀蘇州特約店

產品型號：00730035

更新時間：2024-10-25

廠商性質：代理商

訪問量：4343

產品咨詢 18912626031

產品分類

技術文章

三豐便攜式粗糙度儀的操作及直觀性體現方法

淺述三豐投影儀的使用注意事項

三豐粗糙度儀能給出宏觀和微觀兩種特征的綜合結論

蘇州大理石平臺的特性

詳細介紹在線留言

瑞士TESA測高儀00730035_二維手動MICRO-HITE900測高儀蘇州特約店

A. 主機 Machine

訂貨號 Order No.	描述 Description	規格和尺寸 Model and Size
00730033	TESA MICRO-HITE 350測高儀 TESA MICRO Hite 350	350
00730034	TESA MICRO-HITE 600測高儀 TESA MICRO Hite 600		600
00730035	TESA MICRO-HITE900 測高儀 TESA MICRO Hite 900			900
以上每臺測高儀包含下令組件(不含控制面板) Each set above consists of following components, without control panel
00730021	TESA MICRO-HITE 測高儀主機一臺 1 TESA MICRO-Hite main instrument
00730022	TESA MICRO-HITE測高儀主機一臺 1 TESA MICRO-Hite main instrument
00730023	TESA MICRO-HITE 測高儀主機一臺 1 TESA MICRO-Hite main instrument
00760143	標準測頭安裝座一個 1 Standard probe insert holder
00760227	測球直徑為5 mm的標準測頭一只 1 Standard probe insert with a 5 mm dia. ball tip
00760150	名義尺寸為20.00 mm的校準件一個 1 Master piece with nominal size 20.00 mm
00760142	已安裝就位的電子壓縮氣泵一個 1 Electric pump already mounted for generating the air cushion beneath the gauge base
00760141	電池盒一個 1 Battery pack
04761054	電源適配器一個, 110 ~ 240伏, 50 ~ 60 赫茲輸入 1 Mains adapter, 110 to 240 Vac/50 to 60 Hz
04761055	帶歐式插頭的電源線一根 1 Cable EU for mains adapter
00760151	TESA MICRO-Hite測高儀外罩一個 1 Dust cover for TESA MICRO-Hite
00760152	TESA MICRO-Hite測高儀外罩一個 1 Dust cover for TESA MICRO-Hite
00760153	TESA MICRO-Hite測高儀外罩一個 1 Dust cover for TESA MICRO-Hite

B. 計算機系統和測量軟件Computer System and Measuring Software

訂貨號

Order No.

描述

Description

價格

Price

00760163

TESA《POWER PANEL》控制面板

TESA Control Panel 《POWER PANEL》

XXX

C. 用戶現場安裝 Installation at customer site

機器將由賣方專業工程師在用戶處現場安裝, 并按出廠驗收條件完成驗收. 用戶提供必要的輔助條件

The machine will be installed by a certified engineer from the seller and complete the inspection according to the seller’s specification.

D. 在安裝現場培訓 Training on customer site

機器的使用操作培訓將由賣方專業工程師在用戶現場主持, 培訓時間為1~1.5天. 買方的操作員應具備基本的計量基礎知識.

The operation training will be take on customer site with a period of one and half days, the operators from the buyer should have a basic knowledge on Metrology.

E. 質量保證 Warranty

自在買方完成驗收之日起, 買方提供12個月的保修期, 保修期滿后提供終身有償服務.

The seller provides 12 months of warranty since the date of inspection. Paid service will be provided for the long term.

I. 技術描述 Technical Description

· 主要特征 Key Features

TESA Micro Hite 具有自成一體的設計理念, 非常適合于一維和兩維的幾何坐標測量 – 內外長度, 高度,深度,階梯尺寸和距離.

自動搜索zui高和zui低點的功能及其對zui大zui小值及其差值的記憶能力使之成為圓形尺寸的測量有效工具.

外加TESA 1G-13(選加附件)則更能按照ISO1101標準測量垂直度, 直線度, 平行度和端跳.

此測高儀安裝在鍍鎳的堅固底座上, 底座上配有三個精密拋光支承, 氣浮可使測高儀在測量平臺上輕松移動.

金屬光柵尺帶有零位參考點, 測量頭安裝在滾珠軸承上, 驅動系統可鎖定并進行微調(需選加附件).

計算機誤差補償更提高了長度,直線度和垂直度的測量精度.

TESA Micro Hite is a self-contained design made to measure in 1 or 2 coordinate directions – For length measurements in the form of internal, external, height, depth, step and distance dimensions of geometric elements with flat, parallel or cylindrical surface.

Automatic capture of the culminating point on bores and shafts – Memory functions <max.>, <min.> and <max.-min.> in dynamic probing.

TESA 1G-13 digital probe, as an option, lets you also measure any deviation from perpendicularity, straightness and parallelism as well as runout errors with result output in conformance with ISO1101.

The instrument is mounted on a rugged nickel plated base with bottom face including three supporting points finely lapped. Air cushion usable for easy move of the height gauge accross the surface plate.

Incremental glass scale with reference point. Measuring head mounted on a ball-bearing. Drive system can be locked or tighten. Fine adjust can also be additionally mounted(available as an option).

Extremely accurate measuring of deviations from length, straightness and perpendicularity due to the automatic correction of the bias errors through CAA(Computer Aided Accuracy).

· 技術指標 Performance Specifications

Model/ 型號規格		TESA MICRO-Hite
		350	600	900
測量范圍/ Measuring span	mm	365	615	920
應用范圍/ Application range 配標準附件/ With standard accessory 配訂貨號00760057的測頭座/ With probe insert holder No. 00760057 配訂貨號S07001622的測頭座/ With probe insert holder No. S07001622	mm	520 575 745	770 825 995	1075 1130 1300
zui大允許誤差(帶標準附件)/ Max. permissible error, with standard accessory		(2+3L)μm, (L單位為米/L in m)
重復性(帶標準附件)/ Repeatability, with standard accessory		±2s≤2μm
運動速度/Displacement speed		300 mm/s
測量力/Measuring force		1.6N
機械垂直度/ Mechanical Perpendicularity	μm	<7	<9	<11
主機重量/ Net weights, without panel and battery pack	kg	33	38	45
充電一次使用時間/ Life time of the rechargeable battery		12小時/ 12 hours

· 環境要求Required Specification

存儲溫度范圍: -10℃ ~ 60℃
操作溫度范圍: 10℃ ~ 40℃
工作溫度: 20℃±0.5℃
相對濕度: 80%

工作電壓: 可充電電池6伏,3安培或110 ~ 240伏, 50 ~ 60赫茲交流電壓輸入

Storage temperature range: -10℃ to 60℃
Operating temperature range: 10℃ to 40℃
Working temperature range: 20℃±0.5℃
Relative humidity: 80%, noncondensing

Power supply: Rechargeable battery pack, 6V,3Ah or 110 to 240 Vac , 50 to 60 Hz

· TESA《POWER PANEL》控制面板測量功能/ TESA Control Panel 《POWER PANEL》Function of Control Panel

1) 主要特點/ Key Features:

內置一維和兩維幾何測量程序, 可完成各種常用幾何量測量, 也提供垂直度,直線度測量的可能性. 提供99個測量程序可完成64種幾何特征的測量. 可存儲2500個測量數據. 具有數據統計功能, 測量結果可通過內藏打印機或外接A4打印機輸出, PCMCIA記憶卡可存儲測量程序和數據以便重復使用. 操作者可對屏幕顯示進行多種控制和選擇.

With dedicated program for measuring in 1 and 2 coordinate direction with geometri combination of the measured values. Lets you also measure perpendicularity, straightness and squareness. Provides 99 workpiece oriented measurement cycle including 64 features with related limits of size, programmable. Memory capacity for 2500 measured values. Statistical value processing(SPC). Result output via the built-in matrix printer or in A4 format using an external unit. PCMCIA memory card reader enabling measurement cycles and result to be stored. Operator-controlled on-screen display.

2) 主要測量功能/ Main Measuring function

主要測量功能

Definition of display symbols

描述

Description

不考慮測頭直徑時的測量

Measurements without taking a gauge head constant into account

考慮測頭直徑時的測量

Measurement taking a gauge head constant into account

“連續性顯示”測量模式

“Continuous Display” measuring mode

上兩次測量的差值

Difference of the last two probing

上兩次測量值的差值

Difference between the last two measured values

選擇兩次觸測

Select double probing

選擇單次觸測

Select single probing

取消A和B基準

Cancellation of reference A and B

予置功能

“PRESET” function

將顯示的數值傳給內藏打印機或外設

Transfer the value on the main display to the internal printer or to a peripheral

在儀器存儲器中存儲數據

Confirm the data in the instrument memory

計量單位選擇

Choice of unit selection and number of decimals after the decimal point

取消測量結果

Cancellation of the measuring results

II. 選項 Option

訂貨號 Order No.	圖例 Picture	描述 Description
00760140		TESA 1G-13測頭組件 TESA IG-13 Probe Set
包含下列/Consisting of:
00760139		一個TESA 1G-13數字測頭 1 TESA IG-13 digital probe
00760138		一個TESA 1G-13的附件 1 Attachment for TESA IG-13
其他附件/Other accessories：
01960005		測量螺拴用的抬升尺 Lift lever for the measuring bolt
03540501		10mm長的測頭座 10 mm long extension for probe insert
04761047		1G-13和加強型控制面板的連接電纜(1米) Connecting cable IG-13/Power Panel plus M(1m)
S07020086		的TESA MEMOTAST測頭 TESA MEMOTAST-special

訂貨號 Order No.	圖例 B.Picture	描述 Description
00760173		C. 小套裝附件 D. Partial set of accessories	·
00760148		E. 全套裝附件 F. Full set of accessories		·
以下附件帶塑料包裝/Supplied in a suited plastic case with the following components
00760061		直徑3mm的碳化鎢球頭測桿 1 Measuring insert with a 3 mm dia. Tungsten carbide ball tip	·	·
00760060		直徑10mm的碳化鎢球頭測桿 1 Measuring insert with a 10 mm dia. Tungsten carbide ball tip	·	·
00760066	桶形碳化鎢測桿, 用于圓拄形孔測量和公制螺紋孔位置測量Measuring inserts with tungsten carbide, barrel-shaped measuring faces for cylindrical bores as well as for determining the position of metric (or similar) inside threads	直徑為1mm的測頭(M3到M6螺紋) 1 insert with a 2,2 mm dia. (for M3÷M16)		·
00760067		直徑為4,5mm的測頭(M6到M48螺紋) 1 insert with a 4,5 mm dia. (for M6÷M48)		·
00760068		直徑為9,7mm的測頭(M12到M150螺紋) 1 insert with a 9,7 mm dia. (for M12÷M150)		·
00760074	圓盤形碳化鎢測頭,用于凹槽,狹縫測量 Measuring inserts with tungsten carbide disc tip for grooves, slots, centring shoulders etc.	E = 1 mm / 直徑4,5 mm的測頭 1 insert, E = 1 mm / 4,5 mm dia.		·
00760075		E = 2 mm / 直徑14 mm的測頭 1 insert, E = 2 mm / 14 mm dia.	·	·
00760076		E = 3 mm / 直徑19 mm的測頭 1 insert, E = 3 mm / 19 mm dia.		·
00760082		直徑為2mm的圓拄形碳化鎢測頭 1 insert with a 2 mm dia. Cylindrical carbide measuring face		·
00760096		測座,可安裝帶M1.4或M2.5螺紋的TESATAST測頭 1 Holder for TESATAST probe inserts having either a M1,4 or M2,5 thread	·	·
01860201	帶M1.4螺紋和硬質合金球頂?shù)?/span>TESATAST測頭 TESATAST probe inserts with a carbide ball tip, M1,4 thread	直徑為1mm的測頭 1 insert with a 1 mm dia.	·	·
01860202		直徑為2mm的測頭 1 insert with a 2 mm dia.	·	·
01860203		直徑為3mm的測頭 1 insert with a 3 mm dia.	·	·
01860307		工具 1 Setting key	·	·
00760093		10mm直徑碳化鎢測頭,12mm長不銹鋼測桿 1 Measuring insert with cylindrical measuring face ( 10 mm dia., 12 mm long). Stainless steel body, hardened. Tungsten carbide measuring face.	·	·
00760086		測座,測量深度達110mm 1 Holder for meas. Depths up to 110 mm ( L = 75 mm)		·
00760087		測座,測量深度達185mm 1 Holder for meas. Depths up to 185 mm ( L = 150 mm)		·
00760057		測座, 提高測量范圍 1 insert holder for extending the application range		·
00760094		不銹鋼測桿,一端為平面,另一端為球面 1 Measuring insert with a stainless steel pin, hardened with one flat and one spherical carbide measuring face. Interchangable pin.	·	·
S07001622		測座, 提高測量范圍 Probe insert holder for extending the application range